Centrifugal Chemical Process Pump

Open Type Centrifugal Chemical Process Pump

Product Details:
  • Brand: Jay Ambe Engineering Co.
  • Max Flow Rate: Up to 800 m3/hr
  • Head: Up to 150 meter

We are the supplier and manufacturer of Open Type Centrifugal Chemical Process Pump which are manufactured with ultra specific quality raw material. These pumps contain very rigid construction with extra wall thickness.
This pump gives you unusual protection against highly corrosive chemicals. The solid molded casing and impeller ensure a smooth running pump for long life and a minimum of wear. all pumps, shafts are fitted with sleeves of different materials compatible with the liquid handled.

Specifications :

  • Impeller : Open Type
  • Delivery Size : Up to 200 mm (8 inch)
  • Capacity : Up to 800 m3/hr
  • Head : Up to 150 meter
  • Temperature : 300°C Max
  • Design Pressure : 16 Bar
  • Speed : Up to 3600 rpm
  • MOC : Cast Iron, Cast Steel (WCB), CF8, CF8M, CD41MCu, CH7M

Additional Information:
  • Item Code: Series-SCP

Chemical Process Pump

We are leading manufacturer and exporter of Chemical Process Pumps based at Ahmedabad, India. We have entire range of products under centrifugal pumps category. "JEC" Chemical Process Pumps are of single stage, horizontal end suction type, with semi open impellers. The semi open impellers are used / supplied where liquids, containing solids, or have a tendency to polymerize or crystallize. A special feature is easy of maintenance due to the foot mounted volute casing, permitting removal of the rotating assembly without disturbance of pipe connections.

An extensive choice of materials of construction is offered enabling a wide range of chemicals to be handled. The casing assembly is hydrostatically tested to a minimum of 1.5 times the shut-off pressure.
Additional non-destructive testing procedures are carried out as standard practice on all pump parts.

Specifications:

  • Impeller: Closed / Semi Open
  • Delivery Size: Upto 150 mm (6 Inch)
  • Capacity: Up to 550 M3/Hr.
  • Head: Up to 150 Meter
  • Temperature: 300 Degree Max.
  • Design Pressure: 16 Bar
  • Speed: up to 3600 RPM
  • MOC: Cast Iron, Cast Steel (WCB), CF8, CF8M, CD4MCu, CN7M

Additional Information:
  • Minimum Order Quantity: 1 Unit

Centrifugal Chemical Process Pump

Product Details:
  • Minimum Order Quantity: 1 Unit
  • Impeller: Semi Open Type
  • Delivery Size: Up to 50 mm (2 inch)
  • Temperature: 70 o C Max
  • Design Pressure: 5 Bar
  • Speed : Up to 3000 rpm

We offer a wide range of Centrifugal Chemical Process Pump. These pumps are SemiOpen Type. Polypropylene Pumps Series -PPC is a Non-Metallic horizontal single end suction standardized back pull out process pump.

JEC Polypropylene pumps are supplied with mechanical seal / gland packing arrangement covering 85% of the chemical industries requirement. The pumps are manufactured from polypropylene copolymer-a chemically inert thermoplastic by the use of an exclusive moulding process.

 

 


Additional Information:
  • Item Code: Series-PPC

Centrifugal Chemical Pump

Product Details:
  • Brand: Jay Ambe Engineering Co.
  • Max Flow Rate: 700 M.cu/hr.

We are leading manufacturer & exporter of Centrifugal Chemical Pump.

Range of Product:
"JEC" Centrifugal Chemical Pumps cover a range of capacities extending to 700 M.cu/hr. at 1450 rpm, and 300M.cu/hr_ at 2900 rpm. Head range upto 145 mtrs. Design pressures to 25 bars, and process temperatures extend from -40°C to +300°C, depending on the material of construction.

Materials:
All parts that come into contact with the liquid are made from Cast iron, Ductile iron, Rubber Lined, Cast steel, Bronze, Ni-Resist, Ni-Cast iron, Stainless steel, Alloy-20, R.52, R.53, R.55, Hastally-C, Hastally-B and other Alloy grades as per operating conditions.
Looking for Centrifugal Chemical Process Pump ?
© Jay Ambe Engineering Co.
 
Desktop Site Back to top